FNIRSI 2C23T is a fully functional, highly practical 3-in-1 dual-channel digital oscilloscope with a high-resolution 2.8-inch LCD display (320 x 240 pixels) designed for the maintenance and development industry.
This device is equipped with 3 main functions: oscilloscope, multimeter, and signal generator.
The oscilloscope has an FPGA+MCU+ADC hardware architecture with a sampling rate of 50 MS/s, an analog bandwidth of 10 MHz, and a built-in high-voltage protection module that supports the measurement of peak voltages of ±400 V maximum.
The multimeter has a 4-digit 10000-point RMS value and supports AC/DC voltage and current measurements, as well as capacitance, resistance, diode, on/off, and other measurement functions.
Equipped with a built-in DDS function signal generator, it can output 7 kinds of function signals, with a maximum output of 2 MHz for all signals and a step of 1 Hz; the output frequency, amplitude, and duty cycle are adjustable.
The built-in 3000 mAh rechargeable lithium battery achieves a standby time of up to 6 hours.
Features:
- 2-ch oscilloscope
- 10 MHz bandwidth
- 50 MS/s real-time sampling rate
- 7 signal waveforms
- 10000 counts
- 2.8' HD color display (320 x 240 pixels)
- Dimensions: 167 x 89 x 35 mm
- Weight: 300 g
Oscilloscope:
- Dual channel, 2x 10 MHz bandwidth, 50 MS/s real-time sampling rate
- Maximum measured voltage: ±400 V
- FPGA+ADC+MCU high-performance hardware architecture, capturing waveform details without loss
- Equipped with complete triggering functions (auto, single, normal)
- Equipped with efficient automatic adjustment, the measured waveform can be displayed without complicated adjustment
- Save waveform screenshots, supports exporting images to a computer, facilitate secondary waveform analysis
Multimeter:
- 4-bit integer 9999 counting True RMS measurement
- Identification of voltage, current, capacitance, resistance, diode, on/off, and zero live wire
- Maximum input voltage: AC 750 V, DC 1000 V
- Automatic range, intelligent anti-burning
- Data retention, color screen digital display
Signal Generator:
- 7 signal waveforms: sine wave, square wave, triangular wave, full wave, half wave, noise wave, DC
- Output frequency: 1 Hz-2 MHz
- Output amplitude: 0.1-3.3 V
- Output duty cycle: 0-100%
Package Contents:
- 1 * FNIRSI 2C23T (3-in-1) 2-ch Oscilloscope
- 1 * P6100 oscilloscope probes (10X)
- 1 * Multimeter probe
- 1 * Crocodile clip probe
- 1 * USB-C charging cable
- 1 * Original Manual by FNIRSI (English, German, Spanish, Portuguese, Russian, Chinese)
