Load image into Gallery viewer, FNIRSI LCR-TC1/LCR-T7 TFT LCD Transistor Tester Capacitance Meter ESR NPN PNP MOSFET TC1(1) - FN-LCR-TC-TSTR - Fnirsi - ALTWAYLAB
Load image into Gallery viewer, FNIRSI LCR-TC1/LCR-T7 TFT LCD Transistor Tester Capacitance Meter ESR NPN PNP MOSFET TC1(2) - FN-LCR-TC-TSTR - Fnirsi - ALTWAYLAB
Load image into Gallery viewer, FNIRSI LCR-TC1/LCR-T7 TFT LCD Transistor Tester Capacitance Meter ESR NPN PNP MOSFET TC1(3) - FN-LCR-TC-TSTR - Fnirsi - ALTWAYLAB
Load image into Gallery viewer, FNIRSI LCR-TC1/LCR-T7 TFT LCD Transistor Tester Capacitance Meter ESR NPN PNP MOSFET TC1(4) - FN-LCR-TC-TSTR - Fnirsi - ALTWAYLAB
Load image into Gallery viewer, FNIRSI LCR-TC1/LCR-T7 TFT LCD Transistor Tester Capacitance Meter ESR NPN PNP MOSFET T7(5) - FN-LCR-T7-TSTR - Fnirsi - ALTWAYLAB
Load image into Gallery viewer, FNIRSI LCR-TC1/LCR-T7 TFT LCD Transistor Tester Capacitance Meter ESR NPN PNP MOSFET T7(6) - FN-LCR-T7-TSTR - Fnirsi - ALTWAYLAB

FNIRSI LCR-TC1/LCR-T7 TFT LCD Transistor Tester Capacitance Meter ESR NPN PNP MOSFET

Vendor Fnirsi
In stock and ready for shipping

SKU: FN-LCR-TC-TSTR

Regular price £14.00
Sale price £14.00 Regular price
Sale Sold out
Unit price
/per 
Tax included. Shipping calculated at checkout.
Style:
This is a pre order item. We will ship it when it comes in stock.

LCR-TC1

Features:

The transistor tester built-in large capacity rechargeable lithium battery, including lithium battery voltage detection,
voltage regulator diode (0.01-30V) automatic measurement.
After detection, align the infrared remote control with the "IR" light, and then press the button in the remote control.
If the detector successfully decodes, it will display the data code and infrared waveform.
By placing the pin of the component in the appropriate area and turning the small handle, 3
the detector will automatically test and the final result will be clearly displayed on the backlit TFT screen.

    Specification:

    100% brand new with high quality
    Transistor Tester
    Automatic detection of zener diode  0.01-30V
    Self test with automatic calibration
    IR decoder
    Support Hitachi IR coding
    IR waveform display
    Infrared receiving instruction
    Other
    Measurement results using TFT graphic display(160x128)
    One key operation
    Auto Power Off(Timeout Settable)
    Built-in high capacity rechargeable Li-ion Battery
    Li-ion Battery voltage detection
    Support Chinese and English
    Warning: Built-in Li-ion Battery, it is strictly prohibited the tester immersed in water, or near a heat source!
    Warning: For your personal safety, please strictly comply with the use of Li-ion Battery specifications and precautions!
    Operating Instructions
    Key operational definitions
    Multi-function key has two actions:
    Short press: Press the key and not less than 10 ms, release key within 1.5 seconds
    Long press: Press the key more than 1.5 seconds
    Power on
    In the power off state, short press the multifunction key, the tester is turned on and automatically measured.

      Package Included:

      1 x Multi-functional TFT Transistor tester
      1 x Electronic component set(Send Randomly)
      3 x Test hooks

        Note:

        The colors may be a little difference for the different monitor display. 
        Please check as much as possible to make sure the item is the one that you need.
        Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)

          LCR-T7

          Cautions for use:



          The capacitor shall not be tested without discharge
          The inductance of the transformer cannot be tested
          Don't test online with electricity
          Do not hook three hooks onto the circuit board for testing
          Do not test live circuit boards
          Otherwise, the tester will be burnt down. Burning the tester is the buyer's reason.
          When the voltage and internal battery are below 3V, please charge before use.
          Please use 5V battery or USB port to charge.

          Feature:


          Self test with automatic calibration
          Size: 70*90*26m/ 2.71x3.58x1.10 inch
          Display:TFT Screen, Color Screen
          Diode Range: less than 4.5V
          Zener Diode:Transistor Detect Area: 0.01-4.5V
          Zener Diode Detect Area: 0.01-20V
          Triac Range: IGT less than 6mA
          Capacitance: 25pF-100mF
          Resistor: 0.01-50MΩ
          Inductance: 0.01mH-20H
          Power Voltage: 3.7V
          Product chip: High-performance mcu
          Power: Built-in Rechargeable Lithium Battery
          Measurement results using TFT graphic display (160x128)

          One-button operation
          Auto power off (timeout setting)
          Built-in high-capacity rechargeable lithium-ion battery
          Lithium-ion battery voltage detection
          Support Chinese and English
          Warning: Built-in lithium-ion battery, it is strictly forbidden to immerse the tester in water or near heat source!
          Warning: For your personal safety, please strictly observe the specifications and precautions for using lithium-ion batteries!
          Transistor Detection:
          After the power-off state or test is completed, put the test component into the transistor test area of the test socket, press the lock handle, press the multi-function key, the tester automatically measures, and the measurement result is displayed at the end of the test.
          Warning: Always discharge the capacitor before connecting them to the tester! The tester may be damaged before you turn it on!
          Warning: We do not recommend using a tester to measure the battery! The battery voltage must be less than 4.5V, otherwise the tester may be damaged!
          Component placement:
          The test socket is divided into transistor and Zener diode test areas, as described in 1.1.
          Note: Do not perform other operations during the calibration process to avoid affecting the calibration accuracy!

          Packing List:

          1 x multifunction TFT transistor tester
          1 x electronic component group
          3 x test hook
          Short the three test sockets, press the multi-function button shortly, and the tester will automatically calibrate.
          No other operations are required after disconnecting the short wiring according to the prompt during the calibration process.